Monday, 29 October 2012

Transmission and Distribution Multiple Choice Questions and Answers Preparation for Competition exams pdf



1. By which of the following systems electric power may be transmitted ?
(a)    Overhead system
(b)    Underground system
(c)    Both (a) and (b)
(d)    None of the above
Ans: c

2    are the conductors, which connect the consumer's terminals to the distribution
(a)     Distributors     
(b)     Service mains
(c)    Feeders
(d)    None of the above
Ans: b

3.    The underground system cannot be operated above
(a)     440 V   
(b)     11 kV
(c)     33 kV   
(d)     66 kV
Ans: d
4.    Overhead system can be designed for operation upto
(a)    11 kV   
(b)    33 kV
(c)    66 kV   
(d)    400 kV
Ans: c

5.    If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the
annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the corresponding size of conductor will be most economical. This statement is known as
(a)    Kelvin's law     
(b)    Ohm's law
(c)    Kirchhoffs law
(d)    Faraday's law
(e)    none of the above
Ans: a

6.    The wooden poles well impregnated with creosite oil or any preservative compound have life
(a)    from 2 to 5 years
(b)    10 to 15 years
(c)    25 to 30 years
(d)    60 to 70 years
Ans: c

7.    Which of the following materials is not used for transmission and distribution of electrical power ?
(a)     Copper   
(b)     Aluminium
(c)     Steel   
(d)     Tungsten
Ans: d

8.    Galvanised steel wire is generally used as
(a)     stay wire   
(b)     earth wire
(c)    structural components
(d)    all of the above
Ans: d

9.    The usual spans with R.C.C. poles are
(a)    40—50 metres
(b)    60—100 metres
(c)    80—100 metres
(d)    300—500 metres
Ans: c

10.    The corona is considerably affected by which of the following ?
(a) Size of the conductor
(b) Shape of the conductor
(c) Surface condition of the conductor
(d) All of the above
Ans: d

Read More Transmission and Distribution Questions and Answers => Click Here

7 comments:

bimal *b* said...

Thanks for providing such valuable questions
*bimal*

PM on 5 December 2013 at 00:02 said...

good question

Unknown on 7 January 2014 at 04:49 said...

in auto x'mer tapchanging provide in high voltage side
que. 95 the angular displacement due to reactance of interconneter

Unknown on 12 June 2014 at 10:38 said...

valuable questions

ZalteUG Former Director Maharashtra State Electricity Transmission Co.Ltd.India said...

ZalteUG Former Director (Operations) Maharashtra State Electricity Transmission Co. Ltd.(India).
Good questions except the corrections posted by Brijsinh vala at sr no.3
Thank you.

Anonymous said...

thanks again *b 20.12.2015

Unknown on 27 April 2016 at 06:56 said...

Que 86 ans c

Post a Comment

 

Preparation for Engineering . Copyright 2012 All Rights Reserved