Showing posts with label Mechanical Engineering Objective type questions. Show all posts
Showing posts with label Mechanical Engineering Objective type questions. Show all posts

Thursday, 6 December 2012

Refrigeration and Air Conditioning - Mechanical Engineering Multiple Choice Questions and Answers for competitive exams

12 comments

1.    Pick up the wrong statement. A refrigerant should have
(a)     Tow specific heat of liquid
(b)    high boiling point
(c)    high latent heat of vaporization
(d)    higher critical temperature
(e)    low specific volume of vapour.

Ans: b

2.    A standard ice point temperature corresponds to the temperature of
(a)     water at 0°C    
(b)     ice at - 4°C
(c)    solid and dry ice
(d)    mixture of ice, water and vapour under equilibrium conditions under NTP conditions
(e)     mixture of ice and water Under equilibrium conditions.

Ans: e

3.    Vapour compression refrigeration is some what like
(a)     Carnot cycle   
(b)     Rankine cycle
(c)    reversed Camot cycle
(d)    reversed Rankine cycle
(e)    none of the above.

Ans: e

4.    Which of the following cycles uses air as the refrigerant
(a)     Ericsson   
(b)     Stirling
(c)     Carnot   
(d)     Bell coleman
(e)     none of the above.

Ans: d

5.    Ammonia-absorption refrigeration cycle requires
(a)    very little work input
(b)    maximum work input
(c)    nearly same work input as for vapour compression cycle
(d)    zero work input
(e)    none of the above.

Ans: a

 6.    An important characteristic of absorption system of refrigeration is
(a)    noisy operation
(b)    quiet operation
(c)    cooling below 0°C
(d)    very little power consumption
(e)    its input only in the form of heating.

Ans: b

7.    The relative coefficient of performance is
(a)     actual COP/theoretical COP
(b)    theoretical COP/actual COP
(c)    actual COP x theoretical COP
(d)    1-actual COP x theoretical COP
(e)    1-actual COP/theoretical COP.
Ans: a

8.    Clapeyron equation is a relation between
(a)    temperature, pressure and enthalpy
(b)    specific volume and enthalpy
(c)    temperature and enthalpy
(d)    temperature, pressure, and specific volume
(e)    temperature, pressure, specific value and enthalpy.
Ans: e

9.    Clapeyron equation is applicable for registration at
(a)    saturation point of vapour
(b)    saturation point of liquid
(c)    sublimation temperature
(d)    triple point      
(e)     critical point.
Ans: a

10.  In vapour compression cycle, the condition of refrigerant is saturated liquid
(a)    after passing through the condenser
(b)    before passing through the condenser
(c)    after passing through the expansion throttle valve
(d)    before entering the expansion valve
(e)    before entering the compressor.
Ans: a

Read More Refrigeration and Air Conditioning Questions and Answers => Click Here

Heat Transfer - Mechanical Engineering Multiple Choice Questions and Answers for competitive exams

2 comments

1. Unit of thermal conductivity in M.K.S. units is
(a) kcal/kg m2 °C
(b) kcal-m/hr m2 °C
(c) kcal/hr m2 °C  
(d) kcal-m/hr °C
(e) kcal-m/m2 °C.

Ans: b

2. Unit of thermal conductivity in S.I. units is
(a) J/m2 sec   
(b) J/m °K sec
(c) W/m °K   
(d) (a) and (c) above
(e) (b) and (c) above.

Ans: e

3.     Thermal conductivity of solid metals with rise in temperature normally
(a)     increases   
(b)     decreases
(c)    remains constant
(d)    may increase or decrease depending on temperature
(e)    unpredictable.

Ans: b

4. Thermal conductivity of non-metallic amorphous solids with decrease in temperature
(a)     increases   
(b)     decreases
(c)     remains constant
(d)    may increase or decrease depending on temperature
(e)    unpredictable.

Ans: b

5.     Heat transfer takes place as per -
(a)     zeroth law of thermodynamics
(b)    first law of thermodynamic
(c)    second law of the thermodynamics
(d)    Kirchhoff law (e) Stefan's law.

Ans: c

6.  When heat is transferred from one particle of hot body to another by actual motion of the heated particles, it is referred to as heat transfer by
(a)     conduction      
(b)     convection
(c)     radiation
(d)    conduction and convection
(e)    convection and radiation.

Ans: a

7.    When heat is transferred form hot body to cold body, in a straight line, without affecting the intervening medium, it is referred as heat transfer by
(a)     conduction      
(b)     convection
(c)     radiation
(d)    conduction and convection
(e)    convection and radiation.
Ans: c

8.    Sensible heat is the heat required to
(a)    change vapour into liquid
(b)    change liquid into vapour
(c)    increase the temperature of a liquid of vapour
(d)    convert water into steam and superheat it
(e)    convert saturated steam into dry steam.
Ans: c

9.    The insulation ability of an insulator with the presence of moisture would
(a) increase   
(b) decrease
(c)    remain unaffected
(d)    may increase/decrease  depending  on temperature and thickness of insulation
(e)    none of the above.
Ans: b

10.    When heat is Transferred by molecular collision, it is referred to as heat transfer by
(a) conduction      
(b) convection
(c) radiation   
(d) scattering
(e) convection and radiation.   
Ans: b

Read More Heat Transfer Questions and Answers => Click Here

I.C. Engines - Mechanical Engineering Multiple Choice Questions and Answers for competitive exams

15 comments

1.    The working cycle in case of four stroke engine is completed in following number of revolutions of crankshaft
(a)     1/2   
(b)     1
(c)     2   
(d)     4
(e)     8.

Ans: c

2.    In a diesel engine, the fuel is ignited by
(a)     spark   
(b)     injected fuel
(c)    heat resulting from compressing air that is supplied for combustion
(d)    ignitor
(e)    combustion chamber.

Ans: c

3.    Scavenging air in diesel engine means
(a)    air used for combustion sent under pres-sure
(b)    forced air for cooling cylinder
(c)    burnt air containing products of com-bastion
(d)    air used for forcing burnt gases out of engine's cylinder during the exhaust period
(e)    air fuel mixture.

Ans: d

4.    Supercharging is the process of
(a)    supplying the intake of an engine with air at a density greater than the density of the surrounding atmosphere
(b)    providing forced cooling air
(c)    injecting excess fuel for raising more load
(d)    supplying compressed air to remove combustion products fully
(e)    raising exhaust pressure.

Ans: a

5.    Does the supply of scavenging air at a density greater than that of atmosphere mean engine is supercharged ?
(a)     yes   
(b)     no
(c)    to some extent
(d)    unpredictable
(e)    depends on other factors.

Ans: b

6.    The ratio of indicated thermal efficiency to the corresponding air standard cycle efficiency is called
(a)    net efficiency
(b)    efficiency ratio
(c)    relative efficiency
(d)    overall efficiency
(e)    cycle efficiency.
Ans: c

7.    Compression ratio of LC. engines is
(a)    the ratio of volumes of air in cylinder before compression stroke and after compression stroke
(b)    volume displaced by piston per stroke and clearance volume in cylinder
(c)    ratio of pressure after compression and before compression
(d)    swept volume/cylinder volume
(e)    cylinder volume/swept volume.
Ans: a

8.    The air standard efficiency of an Otto cycle compared to diesel cycle for the given compression ratio is
(a)    same
(b)    less
(c)    more
(d)    more or less depending on power rating
(e)    unpredictable.
Ans: c

9.    The calorific value of gaseous fuels is expressed in terms of
(a)     kcal   
(b)     kcal/kg
(c)     kcal/m2   
(d)     kcal/n?
(e)     all of the above.
Ans: d

More I.C. Engines Questions and Answers => Click Here
 

Preparation for Engineering . Copyright 2012 All Rights Reserved